Wemos D1 - Lolin D1: verschil tussen versies

Uit WaaaghPedia
Geen bewerkingssamenvatting
Regel 1: Regel 1:
== Board ==
== Board ==
[[Bestand:D1 mini v3.1.0 top.jpg|300px|miniatuur|rechts]]
[[Bestand:D1 mini v3.1.0 top.jpg|300px|miniatuur|rechts]]
https://wiki.wemos.cc/products:d1:d1_mini
https://docs.wemos.cc/en/latest/d1/index.html


=== Documentatie ===
=== Documentatie ===

Versie van 26 apr 2020 13:30

Board

https://docs.wemos.cc/en/latest/d1/index.html

Documentatie

Specs

Microcontroller ESP-8266EX
Operating Voltage 3.3V
Digital I/O Pins 11
Analog Input Pins 1(Max input: 3.2V)
Clock Speed 80MHz/160MHz
Flash 4M bytes
Lengte 34,2mm
Breedte 25,6mm
Gewicht 3 Gram

Pins

Pin Functie ESP-8266 Pin Lolin Shield
TX TXD TXD -
RX RXD RXD -
A0 Analog input, max 3.2V input A0 -
D0 IO GPIO16 -
D1 IO, SCL GPIO5 Motor Shield, OLED Shield, Barometric Pressure Shield
D2 IO, SDA GPIO4 Motor Shield, OLED Shield, Barometric Pressure Shield
D3 IO, 10k Pull-up GPIO0 PIR Shield, IR Controller Shield
D4 IO, 10k Pull-up, BUILTIN_LED GPIO2 IR Controller Shield
D5 IO, SCK GPIO14 -
D6 IO, MISO GPIO12 -
D7 IO, MOSI GPIO13 -
D8 IO, 10k Pull-down, SS GPIO15 -
G Ground GND Battery Shield
5V 5V - Battery Shield
3V3 3.3V 3.3V -
RST Reset RST -


All of the IO pins have interrupt/pwm/I2C/one-wire support except D0.


All of the IO pins run at 3.3V.

Shields